Images are for illustrative purposes only.
  • More info

  • Details

  • Spec Sheet

Multi compartment enclosure allows two different users 20U spaces each all in the same footprint of a standard enclosure. Each compartment has its own front and rear access doors with combo locks as standard. There is a divider panel within the rack that separates the two compartments. This allows the facility manager to have access to each compartment, but each compartment has a unique combo code. All features from the standard SmartRacks carry over to these colo racks. In fact, they are all built off the same platform to allow cross usage of accessories.

- Two compartment co-location rack with doors and side panels

- 4 interior vertical posts with unthreaded square hole openings

- Standard 24" width for optimizing floor space

- Ships fully assembled

- Massive front to rear ventilation capacity

- 1360 kgs (3000 lbs) stationary / 1020 kgs (2250 lbs) rolling load capacity

- Locking, removable, reversible front and rear doors

- Combination lock, with key override standard on all doors

- Locking, removable side panels keyed alike with doors

- Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance



- Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters.

- Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.

- Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).

- Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws

- Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.

- Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.

- Maximum usable internal depth of 37 inches/94 cm (front to rear rail).

- Weight ratings of 1360 kgs (3000 lbs) stationary and 1020 kgs (2250 lbs) rolling.

- Front door is locking, reversible and removable.

- Rear doors are locking and reversible.

- Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4 panels total). Side panels are keyed alike to the front and rear doors.

- Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard data center floor tiles.

- Casters are pre-installed and support a rolling load capacity of 1020 kgs (2250 lbs), allowing the enclosures to be pre-configured and rolled to the final installation location. Casters are removable.

- Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable.

- Compact design allows the enclosure to roll through standard height commercial doorways.

- Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and rear doors include quick-release ground wires.

- Open bottom for cable access.

- Top panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first.

- Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of the rack.

- Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance

- Compatibility with airflow optimization accessories as well as cable management accessories.
Colour of product Black
Depth 1090 mm
Form factor 42
Height 1990 mm
Source data-sheet Icecat.biz
Type Freestanding rack
Weight 138200 g
Width 600 mm
EAN 0037332147585
Manufacturer Tripp-Lite

Tripp Lite 42U Co-Location Server Rack Enclosure Cabinet with 2 Separate Compartments, Standard-Depth

£1,603.98 Inc VAT.

£1,336.65

In Stock

42U Co-Location Server Rack Enclosure Cabinet with 2 Separate Compartments, Standard-Depth More details

SR42UBCL

New product

Free CCS Cable Tester With Every 5 Boxes of Cable Free delivery available on all orders

Christmas Opening Times

Buy with Confidence

Consistently great customer reviews

Any Questions?

Just give us a call us on 01376 333 500

Secure Site Guarantee

The best encryption to ensure security

Excellent
4.8 / 5
4332 Reviews
Grant 
Great customer service, quick delivery and above all great prices! Thanks, will use again
2 hours ago
Ross 
Competitive pricing, quick delivery, well packaged and items as expected.
3 hours ago
Anonymous 
Easy site to use , easy to order and fat delivery
21 hours ago

Accessories

4 other products in the same category: