2 GHz DSX-8000 Cat 8 CableAnalyzer: Versiv Main & Remote + DSX Copper Cat 8 modules...
The DSX CableAnalyzer Series copper test solution enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you’ll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits,... More Info
FiberInspector Pro: Versiv Main Unit and Inspection Camera, 4 tips in a box (LC, FC/SC...
Eliminate the #1 cause of fiber failureEnd-face contamination is a leading cause of fiber failures. Dirt and contaminant cause insertion loss and back-reflection that inhibits optical transmission and causes havoc with transceivers. Fiber loss and OTDR testing can expose this problem, but in many cases, dirty connections make fiber testing time consuming and inaccurate. Since dirt can be an issue before, during, or after fiber optic certification testing, and migrate from one end-face to another upon mating, both sides of any connection must... More Info
CertiFiber Pro with Quad (Multimode and Singlemode) OLTS Modules: Versiv Main &...
Installing a high performance fiber optic cabling system starts with systems design and ends with systems acceptance. Certifying cabling to industry performance standards is a core element of the process. The faster it goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down – setting the tester up incorrectly, testing to the wrong limits, dirty fiber endfaces causing testing failures, waiting for lead technicians to analyze or troubleshoot failures, misinterpretation of results, and test... More Info
CableIQ Main Unit (CIQ-100) & CablIQ Advanced IT Kit (CIQ-Kit)
The network tech's vision into cabling bandwidth CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure. Reduce escalated problems by as much... More Info
MicroScanner2 Cable Verifier (MS2-100) & Microscanner2 Professional Kit (MS2-KIT)
Revolutionary Interface – graphical wiremap, length, cable ID, and distance to fault displayed on one screen Multimedia Support – tests all common media types including RJ11, RJ45, Coax, with no need for adapters IntelliTone Toning – trace virtually any cable or wire pair with IntelliTone digital and analog toning VDV Service Detection – verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE Rugged Housing – integrated rubber holster enhances grip and makes it durable enough for the toughest jobs Oversized Display –... More Info
IntelliTone Pro 200 LAN Toner and IntelliTone Pro 200 LAN Toner (MT-8200-63A) &...
Breakthrough digital and analog toning in oneIntelliTone Pro is the first toner and probe to offer digital and analog toning all in one tool. That means it’s equipped with the most powerful cable location and verificationtechnologies for any work environment – even active networks.Eliminates confusion over cable location; decisively rejects noise and false signals Locates the correct cable bundle Isolates a cable within the bundle, despite cable bleed Verifies twisted-pair installation with visual end-to-end continuity test (opens, shorts... More Info
TS90 Cable Fault Finder
This easy-to-use, competitively priced tester is three tools in one—a fault locator, a cable and wire manager and a tone generator with SmartTone technology. From just ONE END of any two or more conductor cable you can measure up to 2,500 feet (762 meters). Easily find the distance to opens or shorts on electrical wire, telephone wire, security wire and coax. Results appear as a distance reading rather than a waveform, so it's perfect for technicians unfamiliar with Time Domain Reflectometery (TDR). Find and fix cable problems without... More Info
TS100 PRO Cable Fault Finder TDR kiit with bridge tap detect
Invest in the right tool for all your technicians. The new TS®100 PRO Cable Fault Finder with PowerBT™ Bridge Tap Detect not only provides open/short circuit detection—to 8,000 feet (2.4 kilometres)—but is also a telecom technician’s first line of defense against bridge taps. Because bridge taps are a significant source of DSL network performance problems, they need to be identified and fixed quickly before causing customer attrition. The TS100 PRO can accurately locate multiple bridge taps in seconds on up to 3,200 feet (975 metres) of... More Info
Enhanced Fiber Optic Cleaning Kit with one-click cleaners
The complete solution for precision end-face fiber optic cable cleaning. NFC-Kit-Case-E includes: Quick Clean 1.25mm cleaner, Quick Clean 2.5mm cleaner, an Quick Clean MPO cleaner, a solvent pen, a cleaning cube and a softcase Contains everything needed to eliminate the #1 cause of fiber optic link failure: contamination Supports all fiber connector types in datacenter and campus environments Quick Clean™ Cleaners—no training required! Solvent pen precisely dispenses specially formulated fiber optic cleaning solution Cards for convenient... More Info
Visual fault locator cable continuity tester locates fibers, finds faults, verifies...
Locates visual faults including tight bends, breaks and bad connectors Accelerates end-to-end fiber checks Easily verifies polarity and identifies fibers Features continuous and flashing modes Ergonomic case survives drops, impacts and vibrations Supports 2.5 mm and 1.25 mm SFF connectors Over 80 hours of battery life with two AA batteries In today's fast-paced workplace maximizing productivity is essential. Whether installing new fiber links or troubleshooting an existing network, the faster you can locate a problem, the faster you can fix... More Info
Fiber OneShot Pro: Meter with SC adapter
VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable not visible or accessible, or when the laser light can’t penetrate the jacket. Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate. Fiber OneShot PRO in fiber optic tool kit fills the gap... More Info