A complete range of Network accessories to help you carry out and complete your installation to the highest quality
19" Cable Management Bar with Horizontal and Vertical Cable RingsNo reviews yet! £7.50 £9.00 Inc VAT.
19" Cable Tidy, suitable for mounting on all 19" data cabinets and server racks, allowing cables to be neatly routed. The vertical cable rings create an ideal bend radius for the cables and greatly assists keeping the rack neat.These Cable Management Panels are designed to give extra support for patch leads and prevents obscurring other equipment. These Panels are designed to prevent cable strain. Makes installation neater and more professional More Info
RJ45 Crimp Tool, for use with Easy RJ45 UTP & FTP Pass through PlugsRead Reviews (3) £34.50 £41.40 Inc VAT.
The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat6 UTP & FTP Pass Through Plugs.With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.- For use with RJ45 Pass through plugs- Can be used to cut outersheath of cable See below for the 4 step 'Easy' Instructions 1 Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.2 Arrange wires into the correct colour code sequence (most commonly EIA/TIA 568B). Slot cable into the plug pushing the wires through. Outer... More Info
Simple tool used to remove PatchLock Leads from SocketsRead Reviews (1) £6.21 £7.45 Inc VAT.
This simple tool is compatible with the PatchLock RJ45 Patch Leads and used to remove the leads from RJ45 Sockets More Info
Network Cabling Testers. For Full description of kits see more infoNo reviews yet! £555.00 £666.00 Inc VAT.
The NaviTEK NT range of network cable testers for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free IDEAL AnyWare™ app. Network troubleshooting - pinpoint and solve network connectivity issues quickly Network service detection - port info, IP/MAC... More Info
This visual fault locator gives a continuous or pulse of red light.No reviews yet! £70.00 £84.00 Inc VAT.
Refraction of the 650nm red light caused by any breaks and or cracks in the fiber will glow red, thus giving an exact visual location of the fault in the fiber. Features: 2.5mm Adapter built into unit(ST, SC, FC connector) 1.25mm adapter availabe to purchase seperatly (this adapter is shown in picture) Robust and handy design Dust-free cup to protect LD Continuous/Pulse mode options Emitting LD 650 nm visible red light Low voltage battery warning signal in led More Info
Self laminating laser lablesRead Reviews (1) £54.65 £65.58 Inc VAT.
Self laminating wrap around cable labels are designed to wrap around cable. Specially designed for synthetic face materials, with excellent clarity, UV stability, good water resistance, good adhesion & heat resistance. 49 Labels per Sheet 21 Sheets per Box Sheet size A4 Labels are supplied blankClick Here to download the label printing software. Please be aware that installation of a new version will overwrite your saved jobs. To keep your saved jobs please be sure to export them prior to installation of your new version, and then import... More Info
2 GHz DSX-8000 Cat 8 CableAnalyzer & accessories. Various models available.No reviews yet! £18,896.45 £22,675.74 Inc VAT.
The DSX CableAnalyzer™ Series is the copper certification solution of the Versiv™ cabling certification product family. The DSX Series includes the DSX-8000, which can certify cabling up to Cat 8 / 2 GHz.The DSX CableAnalyzer Series copper test solution enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system... More Info
High quality PVC insulation tape available in either black or white.19mm wide x 20m long x 0.15mm thick.Flame retardent. More Info
Our braided sleeving offers a flexible cable protection, high abrasion resistance and ease of application. The special braid construction permits the sleeving bore to beexpanded up to 300%.This is suited for the mechanical protection of wire harnesses, hoses and all other applications where exceptional flexibility combined with superior abrasion / cut resistance is required. It also serves as an economical means for wire bundling that will not trap heat or moisture, expanding over irregular shapes, and then contracting to conform and... More Info
Available in packs of 6.No reviews yet! £24.00 £24.00 Inc VAT.
Cobra GermSlayer© Hand Gel contains a powerful bactericide and kills 99.99% of bacteria. Cleans and refreshes hands without the need for soap and water, is fast drying and non-sticky. Food safe, non-perfumed and skin friendly. Apply a small amount to the palm of your hand and gently massage both hands together. British qualityKills 99.99% of Bacteria Due to Hygiene reasons this Item in Non returnable More Info
19" Cable Dump Panels, available in 1u and 2u sizesNo reviews yet! £12.62 £15.14 Inc VAT.
Plastic Cable Dump Panels provide Ideal cable management keeping network cables tidy whilst allowing them to be fed through to the back of the network cabinet.Metal Cable Dump panels available upon request. More Info
Blanking panels for 19" cabinets, available in 1u and 2uNo reviews yet! £7.45 £8.94 Inc VAT.
These 19" cabinet blanking panels are ideal for keeping your cabinet neat, tidy and working efficiently by blanking off any unused space. When used in an environment with servers, they will help stop front to back air movement within the cabinet, protecting your servers from warm air from the rear of the cabinet. More Info
Optional cable management bar for 24 Port Elite PanelsNo reviews yet! £3.92 £4.71 Inc VAT.
Optional Cable management bar for use with Elite Patch Panels (009-001-009-09 and 009-001-009-07) Picture shows Elite Panel with management bar fitted More Info
This universal crimp tool works with RJ45 and RJ12 plugs. More Info
The Pocket Socket Tester is the ideal tool to check continutity and connectivityRead Reviews (2) £20.87 £25.04 Inc VAT.
The Connectix Pocket Socket Tester is a quick, easy to use tool to verify connectivity. Its unique snap-together design makes it easy to take on-site. The tester gives an instant indication of the connections present, because its four bi-colour LEDs indicate the status of the pairs in the cabling. A separate indicator also shows the shield connection for shielded systems. The circuitry has been specially designed to identify crossover patch cords. But the tester is equally suited to check a single patch cord or a complete channel. Features:... More Info
Punchdown tool for terminating on Krone Style IDCsNo reviews yet! £9.89 £11.86 Inc VAT.
The Connectix Cabling system Punch down tool is perfect when terminating the back of any Connectix Cabling System RJ45 Patch Panels or Module. More Info
Simple tool for stripping the outer sheath of cablesRead Reviews (2) £4.97 £5.96 Inc VAT.
The Connectix Cable Stripper is the ideal way of stripping data cables. Its fully encapsulated blades ensure a precisely controlled and constant cutting depth, without the risk of nicking individual wires or fingers. And with only one rotation of the stripper, it removes cable outer jackets of all common shielded and unshielded data cables up to a diameter of 8mm. In addition, it can also be used to strip the outer jacket of RG58 and RG59 size coaxial cables. Features: Controlled cutting depth Encapsulated blades for maximum safety Minimises... More Info
A simple toolkit for all your stuctured cabling installation needsNo reviews yet! £37.50 £45.00 Inc VAT.
The Connectix Cabling Systems Installation Toolkit contains all the tools needed for installing data cabling in one convenient package. The kit contains a pozi-drive screwdriver for cage nuts and cabinet shelves, and a flat blade screwdriver for faceplate screws. It also includes a set of wire cutters, a punchdown tool, cable stripping tool and the Connectix Tester - an easy to use diagnostic tool to confirm connectivity of installed cabling. Features: Contains all the tools required for structured cabling termination Housed in a convenient... More Info