Connectix Cat6 Easy RJ45 Pass through Connectors have been designed with speed and...
1 Pot = 100 plugs1 Box = 20 PotsOur 'Easy' range of RJ45 pass through plugs are made from high quality engineered plastic with brass gold over nickel plating contacts. For best results use with the 'Easy crimp tool allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps Features & Benefits Easy to verify RJ45 568A or 568B colour code Gold Plated Contacts For best results use Connectix Easy RJ45 Crimp Tool Cat6 Performance See below for the 4 step 'Easy' Instructions 1 Remove... More Info
Connectix Cat6 FTP Easy RJ45 Pass Through Connectors have been designed with speed and...
1 Pot = 100 plugs1 Box = 20 Packs The FTP Cat6 modular plugs are made from high quality engineering plastic with brass gold over nickel plating contacts. For best results use with the 'Easy' crimp tool, it allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps. Features & Benefits Easy to verify RJ45 568A or 568B colour code Gold Plated Contacts For best results use with Connectix Easy RJ45 Crimp Tool Cat6 FTP Performance **Please note, these Plugs will not fit onto CAT6A Cable**See... More Info
RJ45 Crimp Tool, for use with Easy RJ45 UTP & FTP Pass through Plugs
The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat6 UTP & FTP Pass Through Plugs.With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.- For use with RJ45 Pass through plugs- Can be used to cut outersheath of cable See below for the 4 step 'Easy' Instructions 1 Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.2 Arrange wires into the correct colour code sequence (most commonly EIA/TIA 568B). Slot cable into the plug pushing the wires through. Outer... More Info
The Pocket Socket Tester is the ideal tool to check continutity and connectivity
The Connectix Pocket Socket Tester is a quick, easy to use tool to verify connectivity. Its unique snap-together design makes it easy to take on-site. The tester gives an instant indication of the connections present, because its four bi-colour LEDs indicate the status of the pairs in the cabling. A separate indicator also shows the shield connection for shielded systems. The circuitry has been specially designed to identify crossover patch cords. But the tester is equally suited to check a single patch cord or a complete channel. Features:... More Info
RJ45 Boots sold individually.The style of boot supplied may vary.
RJ45 Boots to provide strain relief and latch protection on RJ45 CablesThese Boots are suitable for use with Cat5e, Cat6 UTP & Cat6a Stranded Cable. They can also be used on Cat5e & Cat6 UTP Solid Cable.The Boots do not fit onto Cat6 FTP or Cat6a Solid Cable.Our extra wide boot is - 006-003-008-29The style of boot may vary from that shown in the picture More Info