CCS Server Rack Designed to House Servers & 19" Equipment

Connectix Server Cabinets have been designed to offer the optimum housing for servers and networking hardware. Mesh front and rear doors plus a vented roof add up to offer maximum ventilation; whilst the lockable doors all round provide essential security. All doors are fully removable with quick release hinges for easy equipment installation, and the large floor aperture gives maximum cable access. Connectix server cabinets are available in various configurations and are supplied fully assembled. The high quality attractive black finish... More Info

Kit Includes RJ45 Crimp tool, Cat6 Plugs, Stripper & Continuity Tester

This simple termination kit includes all the products required for terminating RJ45 Cat6 Cables & Testing the finished leads. (cable not included)Kit includes: 1 x RJ45 Crimp Tool 1 x Cable Stripper 1 x Contunity Tester 100 x Cat6 RJ45 Plugs 100 x Strain relief boots (select colour above) More Info

6u Black 550mm Deep Wall Cabinet available

The Lightweight Wall Mounting Cabinets feature fixed profiles and a large cutout panel at the rear. The cabinet is finished in Black with a lockable ash grey perspex inset door.The steel framework provides sufficient durability for environments such as risers or shafts. The design allows maximum access to the internal equipment through the top, base and back entrances. Features: Manufactured in the UK Ideal for installation sites where space is limited such as risers and shafts Black Finish Easy access to internal equipment Dimensions By U... More Info

Use Code CONTRACTOR20 at checkout to receive 20% off for a limited timeAlso...

Use Code CONTRACTOR20 at checkout to receive 20% off for a limited timeThis comprehensive kit comprises essential components designed to streamline and simplify network setups. Included are 1 x 24 Way PatchPanel, facilitating organised cable connections, alongside 12 x Single Gang Faceplates, each pre-loaded with 2 modules for convenient accesspoints. Additionally, the pack features 1 x Cable Management Bar to ensure efficient cable organisation.Our Cat6 Natwork Contractor Pack includes: 1 x 24 Way Cat6 UTP Patch Panel 12 x Single Gang... More Info

The range of Connectix Cabling System LC/APC 19” rack mount fibre optic patch panels are available in 1u, 2u and 3u sizes. The panels are manufactured from mild steel; finished in a black power coating (other colours are available on request).Loaded with APC 8-degree angle fibre endface, LC/APC connections achieve improved core alignment and cladding reflected light suitable for data centre, teleco carrier and OSP environments.The patch panels feature adjustable mounting brackets, numbered adaptor ports and a range of rear panel knock-outs... More Info

Punchdown tool for terminating on Krone Style IDCs

Our Punch down tool is perfect when terminating the back of any Connectix Cabling System RJ45 Patch Panels or Module. More Info

One Day In-Person UFO/PON Installation Course

Get ahead of the competition with Connectix Training Sessions Overview Correct installation procedures are a fundamental part of today’s structured cabling industry. We are committed to ensuring that our cabling systems are installed quickly, professionally and in compliance with the rapidly changing standards proposed by the ISO/IEC, ANSI/TIA and CENELEC. Modern building designs often include consideration for cabling infrastructures to support voice and data distribution. It is increasingly the case that tender documents, project... More Info

Right Anglled 24 Cat6 ports in 1u of space

The Connectix 2020 Series Patch Panel is an alternative to the Category 6 High Density Panel. It offers the same Category 6 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear , making termination andcable management easier. Category 6 High Density 24 way panels achieve optimum transmission performances by incorporating the highest quality components and innovative on-board compensation techniques. This panels offer extended PowerSum characteristics and exceeds the... More Info

MTP Fibre Cassette Patch Panel to Hold 4 MTP High Density Cassettes

The Starlight® Modular Panel and cassettes have been designed to simplify installation, and offer users an easy to expand modular system. Starlight® modular panels can accept 4 cassettes, which are simply inserted and locked into the panel by push/pull pins. More Info

UK Mains (BS 1363) Plug to IEC 60320 C13 - 5amp Fused

These UK to IEC C13 leads are ideal for connecting between wall sockets or PDU's to your Computers, Servers, Switches and other equipment with a C13 Male Connector. Features: UK BS 1363 Plug Fused with a 5amp fuse IEC 60320 C13 Female Connector Available in 1mt, 2mt, 5mt & 10mt More Info

Cat5e Jack to Jack Keystone Jack Module

The Cat5e Keystone Couplers requires no termination, just simple plug in Cat5e RJ45 Cables each end The module offers a high performance transmission that meets or exceeds Cat5e standards. They have been designed to be installed into most UK and European keystone applications, including standard or angled faceplate products, patch panels or surface boxes. Features Quick and easy to install Suitable for all standard keystone applications Category 5e hardware performance More Info

One Day In-Person Structured Cabling Installation Course

Get ahead of the competition with Connectix Training Sessions This is a 1 day course, with both the Theory and the Practical elements being completed at our headquarters in Braintree, Essex. OverviewCorrect installation procedures are a fundamental part of today’s structured cabling industry. We are committed to ensuring that our cabling systems are installed quickly, professionally and in compliance with the rapidly changing standards proposed by the ISO/IEC, BSEN and ANSI/TIA.Modern building designs often include consideration for cabling... More Info

Set of 4 Transit Castors for moving your RackyRax Data or Server cabinet into...

These castors are the ideal solution for moving your cabinet aroundRR-C-1 Heavy Duty Load rated up to 600kg evenly distributed RR-C-3 Standard Duty Castors Suitable for Cabinets up to 27u or 300kg evenly distributed weight More Info

24 Port UTP RJ45 Through Coupler Patch Panel - save the time of punching down

Connectix Through Coupler Panels offer Enhanced Category 5 system performance, and feature 24 ports in 1u. They offer the perfect solution when a panel mounted high performance, high density plug-to-plug connection is required. Designed to match the other panels in the Connectix range the Coupler Panels have RJ45 sockets front and rear to facilitate through coupling. Features: High density, 24 ports in 1u Enhanced Category 5 system performance RJ45 to RJ45 connection   Specifcation: Width - 483mm (19”) Depth - 35mm Height 24 way - 1u (44mm)... More Info

Faceplates pre-loaded with Cat5e UTP Modules. Available with 1 or 2 or 4 modules

The Connectix Enhanced Category 5 loaded faceplate consists of 1 or two modules in loaded in a singlegang faceplate or 4 modules loaded in a doublegang faceplate. Ready assembled outlet, ready for installation. Exceeds Enhanced Category 5 specification when used alongside our cable and patch panels Details:   Module DetailsThe Connectix Enhanced Category 5 Compact Module is designed to provide one of the shallowest wall outlets on the market. They are the ideal solution wherever back-box depth is a problem. The attractive high gloss finish... More Info