| 10G support | No |
| AC input frequency | 50/60 Hz |
| AC input voltage | 110 - 240 V |
| Auto MDI/MDI-X | Y |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Built-in processor | Y |
| Cable types supported | Cat5e |
| Certification | UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, FCC Class B |
| Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
| Depth | 170 mm |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Flash memory | 96 MB |
| Flow control support | Y |
| Full duplex | Y |
| Gigabit Ethernet (copper) ports quantity | 16 |
| Heat dissipation | 274.27 BTU/h |
| Height | 44 mm |
| LED indicators | Y |
| MAC address table | 8192 entries |
| Mean time between failures (MTBF) | 1971811 h |
| Networking standards | IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x |
| Operating relative humidity (H-H) | 10 - 90 % |
| Operating temperature (T-T) | 0 - 40 °C |
| Power over Ethernet (PoE) ports quantity | 8 |
| Quality of Service (QoS) support | Y |
| Quick start guide | Y |
| Source data-sheet | Icecat.biz |
| Storage relative humidity (H-H) | 5 - 90 % |
| Storage temperature (T-T) | 8 - 85 °C |
| Switch layer | L2 |
| Switching capacity | 32 Gbit/s |
| Weight | 1300 g |
| Width | 279 mm |
| Half duplex | Y |
| Sustainability certificates | CE |
| Sustainability compliance | Y |
Specific References
Cisco CBS110 Data Sheet
check_circle
check_circle