BT Line Jack Units. 2/1A, 2/2A & 2/3A are single outlet units which are surface mounted complete with back box 3/1A, 3/2A & 3/3A are single outlet units which are flush mounted for use with standard LB3 back boxes 4/1A, 4/2A & 4/3A are double outlet units which are flush mounted for use with standard LB3 back boxes

When installed as part of a flood wired structured cabling system, Connectix Telco Patch Panels provide the option to run data and telecommunications across the same network. Connectix Telco Panels are available in three different variants, 16 RJ45 to 1 x 50 way Telco, 24 RJ45 to 1 x 50 way Telco and 24 RJ45 to 2 x 50 way Telco. The panels...

A full range of quality Power Distribution Units with IEC 60320 outlet configurations. Available in many different outlet configurations and with many input options. Other features include adding a quality ammeter for RMS current measurement. Each outlet is protected by an individual fuse on these PDUs, giving every socket an extra level of...

A fast setting epoxy adhesive used where optical clarity and/or fast cure rates are needed

The ST Connector has been the mainstay of optical fibre connectors for many years. It can be found in almost every communications room worldwide, but used mainly in data communications systems. The ST optical fibre connector comprises of a nickel plated brass body and a ceramic ferrule/spring/crimp barrel assembly plus a crimp over sleeve and...

Precision Cleaning for CS/LC and SC/ST/FC/E2000 Connectors The SENKO SMART CLEANER is a high-efficiency fibre optic cleaning tool designed to remove dust, oils, and other contaminants from connector end-faces—helping to maintain signal integrity and prevent network issues. Available in two versions to suit different connector types, both models...

Our range of Connectix SC to SC fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for super fast data applications. These SC - SC FIbre leads are available in multimode OM1 (62.5/125), OM2 (50/125), OM3 (50/125) and OM4 (50/125) specifications. Our fibre cables are manufactured in...

This CCS Fast Ethernet 100Base-TX to Fiber 100 Base-FX converter features one fiber port with SC connector. It converts electrical signal from 100Base-TX side into optical signal at 100Base-FX side and vice versa. Features: Support 100BaseT Ethernet UTP Standalone or composite application Full-or Half-duplex mode

The Connectix Pre-terminated Plug and Go Fibre System provides the Rapid Fibre Deployment market with an extremely cost effective, expandable and high-speed system. The Connectix Modular Panel and cassettes have been designed to simplify installation, and offer users an easy to expand modular system.  Connectix Modular panels can accept 4 or 10...

The CCS Starlight® Pre-terminated Plug and Go Fibre System provides the Rapid Fibre Deployment market with an extremely cost effective, expandable and high speed system. Starlight® utilises MTP® brand pre-terminated assemblies to ensure optimum performance is achieved when interconnecting pre-terminated Starlight® cassettes and panels....

CCS CoLocation Server Racks provide a perfect solution for your Data Centre Rack & Cabinet requirements. Each compartment is securely segregated and uniquely keyed for increased security, with cable entry top and bottom. The racks are load rated to 1000kg (evenly distributed) Easy baying is possible with an optional baying kit, allowing...

This 251a Boxcon is designed to accept up to 5x 237a disconnection strips (not supplied). The base is fitted with an earthing strip and cable management for up to 50 pair cable