Data & Server Cabinets (451 products)

Rack PDU 2G, Metered, ZeroU, 20A, 208V, (18) C13 & (2) C19, L620 Cord

Remote Management CapabilitiesFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Local Current Monitoring DisplayThe aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local... More Info

Racky Rax Roof Fan Trays

Racky Rax Fan Trays are designed to keep networking equipment cooler by increasing airflow through the cabinet.Specially designed to fit on the roof of Racky Rax Floor cabinets, the Fan trays come complete with either two or four high quality, low noise fans; and are powered via a standard UK 240V plug.The 2 way RR-FT-2 is for use in 600 by 600 mm or 800 by 600 mm Floor Standing cabinets; the 4 way RR-FT-4 is for 600mm by 800mm or 800 by 800mm server cabinets and the Large 4 way RR-FT-14 is for 800 by 1000 mm server cabinet.Features &... More Info

Rack PDU 2G, Switched Plus, ZeroU, 30A, 200/208V, (21) C13 & (3) C19

Network Management Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Individual Outlet Control Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up... More Info

NetShelter SX, 48U, w/o Doors, Black

NetShelter SX 48U 750mm Wide x 1200mm Deep Enclosure Without Sides Without Doors Black More Info

600x35x1915mm, 10kg, White

NetShelter SX 42U 600mm Wide Perforated Curved Door White- Rack system components that can be added to existing racks if requirements change. - Includes : Door handle , Door mounting hardware , Installation guide , Key(s) - Door ventilation exceeds 830 in2 (5355 cm2) Adequate ventilation is required for proper operation of today's servers. NetShelter Enclosures include fully perforated front and rear doors to provide ample ventilation for servers and networking equipment. The perforation pattern provides 844 square inches of open area on... More Info

RACK PDU 2G, METERED, ZEROU, 30A, 200/208V, (36) C13 & (6) C19

Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles,... More Info

Power Cord Kit (6 ea), Locking, C19 to C20 (90 Degree), 0.6m

Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads. More Info

2/4-Post Static Rack Rails Kit

The ReadyRails™ static rail kit for 2U Systems, including PowerEdge R720 provides tool-less support for 4-post racks with square or unthreaded round mounting holes including all generations of Dell racks. It also supports tooled mounting in 4-post threaded racks and 2-post (Telco) racks for added versatility. The static rails support a wider variety of racks than the sliding rails but do not support serviceability in the rack and are thus not compatible with the CMA. This product has been tested and validated on Dell systems. It is supported... More Info

Fixed Vented Data Cabinet Shelf for Rax Server Cabinets - Suitable for 1000mm...

Server Cabinet Shelf, suitable for use in the Rax range of Server Cabinets. The shelf is rated up to 60kg and vented to allow vertical airflow. More Info

Rack PDU 2G, Metered, ZeroU, 17.2kW, 208V, (6) C13 & (12) C19

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC... More Info

75 x 225.8cm, IP20, 19", 48U, 1020.58KG

NetShelter SX 48U 750mm Wide x 1200mm Deep Networking Enclosure with Sides White Feature-rich rack enclosure optimized for easy installation, managing cables, integrating power distribution, and maximizing airflow. Includes: Baying hardware, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting hardware, Pre-installed casters, Side panels, Vertical cable managersCable protection and pass-through Smooth plastic fingers provide proper bend radius.High density cable management The vertical mounting rails are opened up for... More Info

NetShelter SX Colocation 20U 600mm Wide Perforated Curved Door Black

Rack components that can be added to existing racks if requirements change.Includes: Door handle, Door mounting hardware, Installation guide, Key(s) More Info

4 or 5 ring horizontal cable tidy panel to help maintain neat cabling in 19"...

The Connectix Cabling System Cable Tidy Panel enables the neat routing of cables within a 19" rack. This panel comes complete with 4 horizontal rings. Details: These Cable Management Panels are designed to give extra support for patch leads and prevents obscurring other equipment. These Panels are designed to prevent cable strain. Makes installation neater and more professional 4 or 5 Rings Horizontal  More Info

Cabinet 19" brush strip panel

Brush Strip Panels are used to allow the passage of patch leads from the front of a cabinet to the rear whilst maintaining a neat appearance and reducing front to back air flow. More Info

513 x 376 x 2136 mm, 11.82 kg

Eliminates the pain involved in determining where to install rack-mount devices within a rack by labeling each vertical mounting rail with the actual U-height position.Stabilizations plates can either be mounted internally to conserve floor space or externally More Info

Rack PDU 9000 Switched, ZeroU, 30A, 200/208V, (21) C13/C15 & (3) C19/C21

Field-replaceable NMCIntegrated Network Management Card/Display Module can be replaced in the field to minimize downtime disruption in the unlikely event of a failure.High Retention OutletsWith no special power cords required, high retention outlets provide up to twice the holding force to reduce risk of accidental disconnect on 9000 series PDUs.60C Operating TemperatureSelect 9000 series PDUs provide the ability to operate in a maximum ambient air temperature of 60C (140F) at full load ensuring reliability and availability even in... More Info

48U 800 x 1200mm

Integrated joining hardware with multiple width enclosure alignment Enclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure. The pre-installed joining hardware includes holes for joining to an adjacent enclosure at 600mm centers or 24in centers depending upon the floor layout.Enclosure assemble-to-order (ATO) options capable The Enclosure ATO (Assemble-to-Order) options provide a level of customization for enclosure customers beyond the standard enclosure models. This... More Info

600x35x2182mm, 10.91kg, Whire, RoHS

NetShelter SX 48U 600mm Wide Perforated Curved Door WhiteRack system components that can be added to existing racks if requirements change. Includes : Door handle , Door mounting hardware , Installation guide , Key(s) - Door ventilation exceeds 830 in2 (5355 cm2) Adequate ventilation is required for proper operation of today's servers. NetShelter Enclosures include fully perforated front and rear doors to provide ample ventilation for servers and networking equipment. The perforation pattern provides 844 square inches of open area on the... More Info