Connectix Cabling Systems (CCS) was formed in 1993 and has since become a leading manufacturer of communication products for data and voice. They have warehouses throughout the UK each holding extensive stock.
CCS manufacturer their own range of patch panel, server cabinet and data cabinet. They also produce their own patch leads, network cable and fibre cable, each one tested to the highest industry standards and all available for next day delivery from Netstore Direct.
Modular adapter that has a DB9 female connector that plugs into DB9 RS232...
This RJ45 adapter is used to run RS232/Serial data over longer distances using Cat5e cable to bridge the gap. Used in pairs and have selectable pin assignment to enable them to be used for a variety of purposes. Features: Gold plated pin 28AWG wire Thumb screw More Info
Jack to Jack Keystone Jack Module
The Keystone Couplers requires no termination, just simple plug in RJ45 Cables each end The module offers a high performance transmission that meets or exceeds Cat5e & Cat6 standards. They have been designed to be installed into most UK and European keystone applications, including standard or angled faceplate products, patch panels or surface boxes. Features Quick and easy to install Suitable for all standard keystone applications Cat5e & Cat6 hardware performance Fits into a Euro size Faceplate when used with a Keystone Fascia Part... More Info
Straight Through RJ45-BT Lead
Available in 1, 2 , 3 & 5 metres lengths BT connector terminated one end and RJ45 connector terminated the other end. For Connection between voice port and data port These leads are made to order, next day delivery may not be available. THESE LEADS ARE WIRED FOR USE WITH OUR SECONDARY VOICE CONVERTERS. If you require a different spec or more information call Cablemonkey Sales More Info
Shielded Cat5e RJ45 Patch lead, available in lengths up to 20mt in Various...
Connectix Enhanced Category 5 FTP Patch Leads are designed to exceed the performance requirements of the Enhanced Category 5 Specification. Connectix Patch Leads are made from Enhanced Category 5 stranded cable and are terminated using high performance modular plugs. Each lead is individually factory tested to the standard to ensure true standard compatibility. The fully shielded patch leads increase signal isolation and prevent contaminant noise from entering the cabling system. Details: Features: Fully conforms to ANSI/TIA-568-C Available... More Info
DDA Compliant single gang Office style faceplate to take up to 2 Euro Modules
Grey faceplate Ideal for installations that requires a high contrast between the mounting surface and the outlet (as specified in the Disibility Discrimination Act) More Info
Bevelled singlegang faceplate for housing up to 2 Euromod modules
The Connectix Cabling System Single gang faceplates are industry standard size and are compatible with all euro style modules. They are supplied with fixing screws and compatible with Connectix Cabling system euro style modules and 1/4 blanks More Info
Flat singlegang faceplate for housing up to 2 Euromod modules
The Connectix Cabling System Single gang faceplates are industry standard size and are compatible with all euro style modules. They are supplied with fixing screws and compatible with Connectix Cabling system euro style modules and 1/4 blanks More Info
Metal Faceplates pre-loaded 1 Cat6 UTP Module available in Brushed Steel...
Single gang metal faceplate loaded with one Cat6 module Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important.Module DetailsCategory 6 modules provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The use of next generation components and specially designed boards allow a bandwidth of 250MHz to be achieved. Connectix Category 6 Modules are fully compliant with the... More Info
Brushed Steel Metal Faceplates pre-loaded 2 Cat6 UTP Modules
Single gang metal faceplate loaded with two Cat6 modules Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important.Module DetailsCategory 6 modules provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The use of next generation components and specially designed boards allow a bandwidth of 250MHz to be achieved. Connectix Category 6 Modules are fully compliant with... More Info
The Connectix Cabling System Single gang Office style faceplates are industry standard size and are compatible with all euro style modules. The rounded edges and raised surface give these faceplates a nicely styled finish. Each faceplate is supplied with fixing screws and compatible with Connectix Cabling system euro style modules, Keystone Fascia, ½ Blank and 1/4 blanks.Ideal for use with our SingleGang 'Office' Backbox Part number 008-010-001-30 More Info
Connectix Cabling System Office Style Faceplates with its rounded corners fit Perfectly into this surface mount backbox. Uncluttered internal design Tough Shatter Resistant PVC Also available in Doublegang Ideal for use with our 'Office style' Faceplate Part Number:008-001-003-52 More Info
The range of Connectix Cabling System LC/APC 19” rack mount fibre optic patch panels are available in 1u, 2u and 3u sizes. The panels are manufactured from mild steel; finished in a black power coating (other colours are available on request).Loaded with APC 8-degree angle fibre endface, LC/APC connections achieve improved core alignment and cladding reflected light suitable for data centre, teleco carrier and OSP environments.The patch panels feature adjustable mounting brackets, numbered adaptor ports and a range of rear panel knock-outs... More Info
SVGA DDC2 Monitor Cable with Male - Male Connections
SVGA cables suitable for connecting PC's/Laptops/Notebooks to Monitors, Displays and TV's Constructed using UL2919 approved 28awg triple mini coaxial and 4x 28awg conductor cables Triple shielded with copper braid, foil and drain wire. Features: HD15 Male - Male Up to 20mt All pins connected Pins 12+15 connected to ensure all possible resolutions are supported and the video card is always perfectly set up against the monitor DDC2 More Info
Line Jack Units (LJUs) available with PSTN, PABX and Seconday options
BT Line Jack Units.2/1A, 2/2A & 2/3A are single outlet units which are surface mounted complete with back box 3/1A, 3/2A & 3/3A are single outlet units which are flush mounted for use with standard LB3 back boxes 4/1A, 4/2A & 4/3A are double outlet units which are flush mounted for use with standard LB3 back boxes More Info
Connectix Type 100 LSZH Cca, S1a, d1,a1
The triple shielded CT100 cable was specially designed to meet the most stringent requirements in terms of shielding and safety in case of fire, or release of hazardous substances during regular operation or product dismantling.According to the European classification defined in the Construction Products Regulation (CPR), the CT100 cable is a Cca-type cable - one of the top cable categories - given its performance and fire resistance.Thanks to the additional shielding foil and high-coverage braid, this cable is perfect for television... More Info
One Day In-Person UFO/PON Installation Course
Get ahead of the competition with Connectix Training Sessions Overview Correct installation procedures are a fundamental part of today’s structured cabling industry. We are committed to ensuring that our cabling systems are installed quickly, professionally and in compliance with the rapidly changing standards proposed by the ISO/IEC, ANSI/TIA and CENELEC. Modern building designs often include consideration for cabling infrastructures to support voice and data distribution. It is increasingly the case that tender documents, project... More Info
Y Splitter Cable, from UK Plug to IEC C13 Female
UK Power Lead Y Splitter Cable to 2x IEC C13 Female connectors, ideal for powering to devices with one outlet. Features Fully Moulded and Fused Colour: Black and Hanked Plug to Y 2m Y Lead 0.5m More Info
UK Mains (BS 1363) Plug to IEC 60320 C13 - 5amp Fused
These UK to IEC C13 leads are ideal for connecting between wall sockets or PDU's to your Computers, Servers, Switches and other equipment with a C13 Male Connector. Features: UK BS 1363 Plug Fused with a 5amp fuse IEC 60320 C13 Female Connector Available in 1mt, 2mt, 5mt & 10mt More Info