Cat6 Networking (78 products)

Connectix Cat6 Easy RJ45 Pass through Connectors have been designed with...

1 Pot = 100 plugs1 Box = 20 PotsOur 'Easy' range of RJ45 pass through plugs are made from high quality engineered plastic with brass gold over nickel plating contacts. For best results use with the 'Easy crimp tool allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps Features & Benefits Easy to verify RJ45 568A or 568B colour code Gold Plated Contacts For best results use Connectix Easy RJ45 Crimp Tool Cat6 Performance See below for the 4 step 'Easy' Instructions 1 Remove... More Info

Metal Faceplates pre-loaded 1 Cat6 UTP Module available in Brushed Steel...

Single gang metal faceplate loaded with one Cat6 module Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important.Module DetailsCategory 6 modules provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The use of next generation components and specially designed boards allow a bandwidth of 250MHz to be achieved. Connectix Category 6 Modules are fully compliant with the... More Info

Surfance mount backbox suitable for mounting doublegang faceplates

Connectix Cabling System Faceplates fit perfectly with the module and cables fitting comfortable inside. Earth terminal provision incorporated. Tough shatter resistant PVC. Uncluttered internal design Surface mounted More Info

Tamper Proof Cat6 Outlets - Available with 2 or 4 Outlets

The Connectix 4000 Series offers Enhanced Category 6 performance in a High Density package. The Tamperproof outlet restricts the user’s access to patch leads, eliminating unauthorised or accidental patch lead disconnection which is one of the most common causes of network problems. The 4000 Series is extremely quick and easy to install; just attach the base plate, snap in the PCB, punch down the cables and install the cover. But the Tamperproof version has the added benefit that leads cannot be unplugged without first removing the cover, and... More Info

19" Cable Dump Panels, available in 1u and 2u sizes

Plastic Cable Dump Panels provide Ideal cable management keeping network cables tidy whilst allowing them to be fed through to the back of the network cabinet.Metal Cable Dump panels available upon request. More Info

Faceplates pre-loaded with Cat6 UTP Modules. Available with 1 or 2 or 4 modules

The Connectix Enhanced Category 6 way loaded faceplate consists of 1 or two modules in loaded in a singlegang faceplate or 4 modules loaded in a doublegang faceplate. Ready assembled outlet, ready for installation. Exceeds Enhanced Cat6 specification when used alongside our cable and patch panels Details: Module DetailsThe Connectix Category 6 Compact Module is designed to provide one of the shallowest wall outlets on the market. They are the ideal solution wherever back-box depth is a problem. The attractive high gloss finish and easy to... More Info

Dyline backbox suitable for mounting singlegang faceplates

Connectix Cabling System Faceplates fit perfectly with the module and cables fitting comfortable inside. Earth terminal provision incorporated. Tough shatter resistant PVC. Uncluttered internal design Desingned for installation into dry lined walls More Info

Blanking panels for 19" cabinets, available in 1u and 2u

These 19" cabinet blanking panels are ideal for keeping your cabinet neat, tidy and working efficiently by blanking off any unused space. When used in an environment with servers, they will help stop front to back air movement within the cabinet, protecting your servers from warm air from the rear of the cabinet. More Info

Metal Faceplates pre-loaded 4 Cat6 UTP Modules

Doublegang metal faceplate loaded with four cat6 modules Fit perfectly onto standard size double gang back boxes Ideal for installing into situations where matching the surrounding décor is important.Module DetailsCategory 6 modules provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The use of next generation components and specially designed boards allow a bandwidth of 250MHz to be achieved. Connectix Category 6 Modules are fully compliant with... More Info

Dyline backbox suitable for mounting doublegang faceplates

Connectix Cabling System Faceplates fit perfectly with the module and cables fitting comfortable inside. Earth terminal provision incorporated. Tough shatter resistant PVC. Uncluttered internal design Desingned for installation into dry lined walls More Info

Optional cable management bar for 24 Port Elite Panels

Optional Cable management bar for use with Elite Patch Panels (009-001-009-09 and 009-001-009-07) Picture shows Elite Panel with management bar fitted More Info

Quarter Blank For Faceplates (Half Module Width)

Will fit into any CCS Faceplates Gives a neat and tidy finish, if you dont have enough modules to fill a faceplate Two 1/4 blanks equal the size of one module Pack contains 1 quarter blank More Info

DDA Compliant single gang faceplate to take up to 2 Euro Modules

Grey faceplate Ideal for installations that requires a high contrast between the mounting surface and the outlet (as specified in the Disibility Discrimination Act) More Info

Punchdown tool for terminating on Krone Style IDCs

Our Punch down tool is perfect when terminating the back of any Connectix Cabling System RJ45 Patch Panels or Module. More Info

DDA Compliant double gang faceplate to take up to 4 Euro Modules

Grey faceplate Ideal for installations that requires a high contrast between the mounting surface and the outlet (as specified in the Disibility Discrimination Act) More Info

The Connectix Cabling System Single gang Office style faceplates are industry standard size and are compatible with all euro style modules. The rounded edges and raised surface give these faceplates a nicely styled finish. Each faceplate is supplied with fixing screws and compatible with Connectix Cabling system euro style modules, Keystone Fascia, ½ Blank  and 1/4 blanks.Ideal for use with our SingleGang 'Office' Backbox Part number 008-010-001-30 More Info

The Connectix Cabling System Double gang Office style faceplates are industry standard size and are compatible with all euro style modules. The rounded edges and raised surface give these faceplates a nicely styled finish. Each faceplate is supplied with fixing screws and compatible with Connectix Cabling system euro style modules, Keystone Fascia, ½ Blank  and 1/4 blanks.Ideal for use with our DualGang Office Backbox Part number 008-010-002-30 More Info

Din Rail Mounted Keystone Module End Cap More Info