Fusion Splicers, Termination Kits & Fibre Blowing Machines (34 products)

The Mini 6S+ comes with all the same excellent specification as the Mini 6s Core Alignment Fusion Splicer but with extra enhancements so that users spends even less time on each termination.  This unit is still the same compact size for convenient transportation and storage & comes with a full range of accessories and spares.Heating Time15sec with 60mm sleeve The Fast Splicing Time7sec with SM fiberUniversial Holder250㎛ / 900㎛ / 2~3Φ / Indoor LED Injection System(No Mirrors)400 cycles (Splicing & Heating)with Two Batteries... More Info

The V0 Fibre Blowing Machine is an extremely compact electrically operated fibre blowing machine optimised for FTTx installation of blown fibre (EPFU) and micro/nano cables, from 0.8 to 6mm into duct from 3 to 16mm. A full digital control system with soft- start, electronic fibre security, memory functions, combined with high speed possibility makes the machine very easy and effective to use. Can be operated directly from its case.Features & BenefitsElectrically operated, battery connected, optional power supply Allows installation in... More Info

Flowlight Jetluber is a device that lubricates the optical fibre cable during fibre blowing. The unit is air-powered and works with a pre-equipped V2 or V3 Jetting machine. Flowlight Jetluber comes with an air valve connector and connection hose for fibre blowing machine. Features & BenefitsSupports cable installation Easy to use Lightweight No electricity needed Quick connection to machine Easy drain Adjustable amount of lube Low air consumption Compact size Protected in hard case No noise More Info

The V0 HD fibre Blowing Machine is an extremely compact electrically operated fibre blowing machine optimized for FTTx installation of blown fibre (EPFU) and micro/nano cables, from 0.8 to 6.5mm into duct from 3 to 16mm. A full digital control system with soft-start, electronic fibre security, memory functions, combined with a 200N powerful motor makes the machine flexible and effective to use. Can be operated directly from its case.Features & BenefitsElectrically operated, battery connected, optional power supply Allows installation... More Info

Available in 2 sizes: Drum rack for fibre cable drums up to 800mm or 1200mm. Features & BenefitsEasy to assemble and disassemble with few parts The drum rolls easily onto the drum rack Improves ergonomics by allowing the drum rack to be turned 180°; this way, you can pull or push the drum in front of youDrum Rack Size  PropertiesUp to 800mm Max Drum Size 800mm/100kgAdapter For  Ø80-60-40mmTransport Size (L x W x H) 80mm x 90mm x 60mmWeight 10kgUp to 1200mm Max Drum Size 1200mm/150kgAdapter For  Ø80-60-40mm... More Info

JetLogger is a professional documentation system for the installer who needs an efficient and professional electronic documentation of the cable blowing process. JetLogger has been developed together with installers, network owners and approved by German Telecom – ZTV TKNetz 40.The JetLogger can be used with the following models: V2, V3, V0 and V0 HD.Features & BenefitsIndividual input describing the job, cable and pipe/duct Automatic input of temperature, humidity and the exact position by GPS Monitoring every 1m: The air pressure... More Info

The Flowlight Working Table for fibre blowing machines. The stable and robust frame with a stainless top plate makes it easy to position your machine. Features & BenefitsFoldable for easy transportation Creates good ergonomics  Lightweight  Easy to assemble  Easy to disassemble  No small parts  No tools needed TECHNICAL DATAWeight: 19kg Folded Dimensions (W x D x H): 105 x 25 x 21mm Table Top Dimensions (W x D x H): 95 x 45 x 7.5mm Unfolded With Table Top Attached (W x D x H): 125 x 70 x 87mm More Info

The Fibre Optic Epoxy Termination Tool Kit offers all the general tools required for the preparation of fibre cable being used for the connection to LC, SC or ST ends. A great solution for both when on-the-go or needing to terminate in house. Everything fits neatly inside the sturdy carry case giving great storage for all the equipment supplied and easy to fit everything back in its place after being used.Although this kit isn’t provided with any connectors, we have a wide selection of all fibre connectors in stock that can be purchased... More Info

The V3 Fiber Blowing Machine 1000N is a robust and powerful, pneumatic operated fiber blowing machine designed for single cables and for relining of multiple microducts. Configuration can be made for cables between 4 and 40mm, making it ideal for both microfiber cable installations and backbone installations, with duct dimensions between 10 and 63mm. The unique joystick controller and agile motors ensure optimal control of the installation. With an anodized aluminum construction, the machine is lightweight yet exceptionally strong.V3 Fiber... More Info

Cleaning sponges for ducts.

Use the lubrication together with cleaning sponges by blowing them through cloth or pipe for lubrication and cleaning. Repeat process until you determine if more plugs need to be blown through. Available for all sizes of duct and pipes.Part Number Inner Duct Diameter (mm) Packing Size (pcs)CP3.5-5 3.5-5 50CP7-11 7.0-11 50CP8-12 8.0-12 50CP14-21 14-21 10CP17.5-27 17.5-27 10CP22-35 22-35 10CP25-40 25-40 10CP27-45 27-45 10CP32-55 32-55 10 More Info