Images are for illustrative purposes only.
  • More info

  • Details

  • Spec Sheet

Intuitive LCD interface

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.



Predictive replace battery date

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.



Audible alarms

Provide notification of changing flywheel conditions



InfraStruXure Central compatible

Enables centralized management via APC InfraStruXure® Central.



SmartSlot

Customize UPS capabilities with management cards.



Cold-start capable

Provides temporary battery power when the utility power is out.



Serial Connectivity

Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.



Resettable circuit breakers

Enables a quick recovery from overload events.



Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced



Disconnected battery notification

Warns when a battery is not available to provide backup power.



Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.



Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.



Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.



Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.



Audible alarms

Provides notification of changing utility power and UPS conditions.



User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)



USB connectivity

Provides management of the UPS via a USB port (not available on all models).



Serial Connectivity

Provides management of the UPS via a serial port.



Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.



Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery.



Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.



Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.



Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.



Network manageable

Provides remote management of the UPS over the network.



Adjustable voltage sensitivity

Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.



Predicitive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.
AC outlet types C13 coupler
AC outlets quantity 4 AC outlet(s)
Battery capacity 336 VAh
Battery recharge time 3 h
Battery technology Sealed Lead Acid (VRLA)
Cables included RS-232,USB cable
Certification CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, UL 1778, VDE, REACH, PEP, EOLI
Colour of product Black
Depth 457 mm
Display LCD TFT
Efficiency 98.2 %
Ethernet LAN (RJ-45) ports quantity 1
Form factor Rackmount
Height 89 mm
Hot-swap battery Yes
Input operation voltage (max) 302 V
Input operation voltage (min) 151 V
Interface RJ-45 Serial,SmartSlot,USB
LED indicators Yes
Noise level 45 dB
Nominal input voltage 230 V
Nominal output voltage 230 V
Non-operating altitude 0 - 15000 m
Operating altitude 0 - 3000 m
Operating relative humidity (H-H) 0 - 95 %
Operating relative humidity range 0 - 95 %
Operating temperature (T-T) 0 - 40 °C
Operating temperature range (T-T) 0 - 40 °C
Output connections 4 x IEC 320 C13 2 x IEC Jumpers
Output operation voltage (max) 240 V
Output operation voltage (min) 220 V
Output power 700 W
Output power capacity (VA) 1000 VA
Package dimensions (WxDxH) 594 x 603 x 251 mm
Package height 251 mm
Package weight 31450 g
Package width 594 mm
Power supply input frequency 50/60 Hz
Quantity per pallet 8 pc(s)
Quick installation guide Yes
Rack capacity 2U
Rack mounting 2U
Replacement battery cartridge APCRBC132
RoHS compliance Yes
Serial ports quantity 1
Source data-sheet Icecat.biz
Storage relative humidity (H-H) 0 - 95 %
Storage relative humidity range 0 - 95 %
Storage temperature (T-T) -15 - 45 °C
Storage temperature range (T-T) -15 - 45 °C
Surge energy rating 459 J
Typical backup time at full load 8.7 min
Typical backup time at half load 31.3 min
USB port Yes
Waveform Sine
Weight 28180 g
Width 432 mm
EAN 7313042847414
Manufacturer APC

APC Smart-UPS

£702.84 Inc VAT.

£585.70

In Stock

Smart-UPS - 750W/1000VA, 230V, 2U, RJ45, USB, black More details

SMT1000RMI2U

New product

Free CCS Cable Tester With Every 5 Boxes of Cable Free delivery available on all orders

Christmas Opening Times

Buy with Confidence

Consistently great customer reviews

Any Questions?

Just give us a call us on 01376 333 500

Secure Site Guarantee

The best encryption to ensure security

Excellent
4.8 / 5
4218 Reviews
Brian 
A good quality product at a sensible price and received promptly.
19 hours ago
Anonymous 
Great products and fast shipping, thank you :)
1 day ago
Michael 
Great quality product and speedy service.
2 days ago

Accessories

Customers who bought this product also bought:

12 other products in the same category: