Compatible with Extreme 10338

Compatible with Cisco Viptela VIP-SFP+-10GE-LRForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 1310nmDistance: 10kmConnector: Dual LCFiber Type: SMFOperating Temperature: 0~70 CDOM Supported: Yes

Compatible with Cisco Meraki MA-SFP-10GB-SRForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 850nmDistance: 300mConnector: Dual LCFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes

Compatible with Watchguard WG8584Form Type: SFPData Rate: 100/1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No

Compatible with Cisco Systems GLC-TForm Type: SFPData Rate: 1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No

Compatible with Cisco SMB MGBLX1 Form Type: SFP Data Rate: 1000BASE 1.25Gbps Wavelength: 1310nm Distance: 10km Connector: Dual LC Fiber Type: SMF Operating Temperature: 0~70 C DOM Supported: Yes

Compatible with Cisco SMB MGBSX1 Form Type: SFP Data Rate: 1000BASE 1.25Gbps Wavelength: 850nm Distance: 550m Connector: Dual LC Fiber Type: MMF Operating Temperature: 0~70 C DOM Supported: Yes

Three hole strippers suitable for stripping 250um coated loose tube and 900um buffer tube. This simple tool has extremely accurate hardened jaws that remove the buffer without scratching the fibre. The tool has a spring action that ensures that the blades return to the open position when not in use

Measure fiber optic power in milliwatts (mW) and decibel-milliwatts (dBm) to test and troubleshoot active LANs. Quickly measure cabling loss with the automatic calibration feature that stores reference power from any light source for quick dB loss calculations. Plus, the 1490nm wavelength measurement mode is perfect for troubleshooting emerging...

Fibre optic pigtails are typically used to link the fibre optic cable with fibre optic equipment. The connector side of the pigtail is used to link the equipment, while the other side is fusion spliced together with the fibre cable. By splicing together the fibre glasses, it can reach a minimum insertion loss. We are committed to holding...

Our singlemode fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for datacomms and CATV applications. The leads are manufactured in our advanced fibre termination facility under stringently controlled quality conditions. Our termination facility is one of the largest in the UK...

Our range of Connectix LC to ST fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for exceptionally fast data applications. These LC - ST FIbre leads are available in multimode OM1 (62.5/125), OM2 (50/125) and OM3 (50/125) specifications. Our fibre cables are manufactured in our...