Categories

Excellent
star star star star star
4.8 / 5
8854 Reviews
Zaneta 
star star star star
Product as described
Stuart 
star star star star star
I was delighted when the cable arrived and well protected. I had to convert an old 1960s coffee pot to work on today's electric and found cable monkey which had the exact lead I needed.
Guy 
star star star star star
Great range of quality stock and speedy turnaround. Thanks Cable Monkey
Cisco SFP - 10/100/1000 Ethernet BaseT Multirate Copper RJ45
SFP Module

The SFP transceiver module is a bidirectional device with a transmitter and receiver in the same physical package. The module interfaces to the network through a connector interface on the electrical ports and through an LC termination connector on the optical ports. Electrical interfaces and dimensions are defined in the SFF-8472 industry-standard multisource agreement (MSA).



A schematic of the SFP transceiver module functional block diagram is illustrated in Figure 2. It contains three parts: the transmitter, receiver, and Electrically Erasable Programmable Read-Only Memory (EEPROM) storage chip. This block diagram is intended for information purposes only and does not illustrate design requirements.



Transmitter

In the transmit direction, the SFP transceiver module receives the electrical signal and transmits this data in an optical signal by using a laser driver that controls the laser diode. The optical output power is held constant by an automatic power control circuit.



Receiver

In the receive direction, the SFP transceiver module receives an NRZ optical signal and converts it to an electrical equivalent. The receive portion of the module will use some kind of amplifier to control the converted electrical signal.



EEPROM

This type of SFP transceiver is identified by the standard two-wire serial interface used in EEPROM with an I2C interface (with serial ID functions) that is part of the GBIC specifications and the SFF-8472 MSA. In addition, EEPROM offers an enhanced monitoring interface for optical transceivers as described in SFF-8472, which allows real-time access to the device to enable monitoring of received optical power, laser bias current, laser optical output power, etc.
Cabling technology10/100/1000 Ethernet BaseT
Compliance industry standardsIEEE-802.3
Connectivity technologyWired
Connector(s)RJ-45 STP Cat5e & Cat6
Data transfer rate (max)1000 Mbit/s
InterfaceSFP
Maximum transfer distance100 m
Mean time between failures (MTBF)4068349 h
Operating temperature (T-T)-10 - 85 °C
Plug and PlayYes
Power consumption (typical)1 W

Similar products

  • TP-LINK MC100CM
    TP-LINK MC100CM
  • TP-LINK 10/100Mbps Single-mode Media Converter
    TP-LINK 10/100Mbps Single-mode Media...
  • TP-LINK 10/100Mbps WDM Media Converter
    TP-LINK 10/100Mbps WDM Media Converter
  • TP-LINK 10/100Mbps WDM
    TP-LINK 10/100Mbps WDM
  • TP-LINK Gigabit Multi-mode Media Converter
    TP-LINK Gigabit Multi-mode Media Converter

Cisco SFP - 10/100/1000 Ethernet BaseT Multirate Copper RJ-45

SFP - 10/100/1000 Ethernet BaseT Multirate Copper RJ-45

ONS-SE-ZE-EL=

Out of Stock

£378.42
£315.35 Ex VAT.

Collect monkey points, exchange for Amazon vouchers
Require project pricing? - request a quoteNeed a trade account? - send us your details Are you a public sector organistion? - open a credit account