Images are for illustrative purposes only.
  • More info

  • Details

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.



Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance



Power-saving outlets

Automatically cuts power to idle equipment to conserve electricity.



Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse.



Battery-protected and surge-only outlets

Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment



Cold-start capable

Provides temporary battery power when the utility power is out.



Serial Connectivity

Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.



Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced



Disconnected battery notification

Warns when a battery is not available to provide backup power.



Dataline Surge Protection

Provides protection of connected equipment from power surges on the data lines.



Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.



Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.



Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.



Audible alarms

Provides notification of changing utility power and UPS conditions.



User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)



USB connectivity

Provides management of the UPS via a USB port (not available on all models).



Serial Connectivity

Provides management of the UPS via a serial port.



Transformer-block spaced outlets

Protect equipment with input transformer blocks without blocking access to other receptacles.



Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery.



Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.



Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.



Building Wiring Fault Indicator

This LED informs users of potentially dangerous wiring problems in the wall circuit.



Adjustable voltage sensitivity

Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.



Battery replacement without tools

Allows quick, easy battery replacement.



LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.
AC outlet typesC13 coupler
AC outlets quantity8 AC outlet(s)
Battery capacity157 VAh
Battery recharge time8 h
Battery technologySealed Lead Acid (VRLA)
Bundled softwarePowerChute Personal Edition
Cables includedUSB cable
CertificationREACH, PEP, EOLI, NEMKO-GS, GOST, CE, C-Tick, KETI, TISI, A-Tick
Colour of productBlack
Crest factor3:1
Depth382 mm
Dimensions (WxDxH)100 x 382 x 250 mm
DisplayLCD
Efficiency97.4 %
Height250 mm
Hot-swap batteryYes
Input connection typeIEC-320 C14
Input operation voltage (max)300 V
Input operation voltage (min)156 V
ManualYes
Maximum current8 A
Noise level45 dB
Nominal input voltage230 V
Nominal output voltage230 V
Non-operating altitude0 - 4763.6 m
Operating altitude0 - 2952.6 m
Operating relative humidity (H-H)0 - 95 %
Operating relative humidity range0 - 95 %
Operating temperature (T-T)0 - 40 °C
Operating temperature range (T-T)0 - 40 °C
Output connections4x IEC 320 C13 (Battery Backup) 4x IEC 320 C13 (Surge Protection)
Output power540 W
Output power capacity (VA)900 VA
Package height337 mm
Package weight11700 g
Package width225 mm
Power supply input frequency50/60 Hz
Quantity per pallet30 pc(s)
Replacement battery cartridgeAPCRBC123
RoHS complianceYes
Source data-sheetIcecat.biz
Storage relative humidity (H-H)0 - 95 %
Storage relative humidity range0 - 95 %
Storage temperature (T-T)-15 - 45 °C
Storage temperature range (T-T)-15 - 45 °C
Surge energy rating613 J
Surge protection featuresDigital Subscriber Line (DSL),Fax,Modem,Network,Telephone
Typical backup time at full load4.6 min
Typical backup time at half load15.9 min
USB portYes
WaveformSine
Weight10720 g
Width100 mm
EAN0731304279594
ManufacturerAPC

APC Back-UPS Pro

£239.28 Inc VAT.

£199.40

In Stock

Power-Saving Back-UPS Pro 900, 230V More details

BR900GI

New product

Free CCS Cable Tester With Every 5 Boxes of Cable Free delivery available on all orders

Christmas Opening Times

Buy with Confidence

Consistently great customer reviews

Any Questions?

Just give us a call us on 01376 333 500

Secure Site Guarantee

The best encryption to ensure security

Excellent
4.8 / 5
3403 Reviews
11 hours ago
Andrew
Excellent easy to use site, good range of products at good prices. Prompt delivery services too. My only thought is maybe invoices should be sent out automatically.
1 day ago
David
prompt delivery, everything in the box as ordered
1 day ago
Anonymous
Very, efficient, and fast delivery.

Related Products

Customers who bought this product also bought:

3 other products in the same category: