Cat5e Networking (79 products)

Jack to Jack Keystone Jack Module

The Keystone Couplers requires no termination, just simple plug in RJ45 Cables each end The module offers a high performance transmission that meets or exceeds Cat5e & Cat6 standards. They have been designed to be installed into most UK and European keystone applications, including standard or angled faceplate products, patch panels or surface boxes. Features Quick and easy to install Suitable for all standard keystone applications Cat5e & Cat6 hardware performance Fits into a Euro size Faceplate when used with a Keystone Fascia Part... More Info

Kit Includes 6u Cabinet, 24 Port Patch Panel & 24 Port Switch

Our Cat5e Wall Cab Kit comes complete with: 1 x 6u 300mm Deep Wall Cabinet 1 x Cat5e 24 Port Patch Panel 1 x 24 Port Fast Ethernet Network Switch Once loaded the cabinet will be left with 4u of space for additional equipment. More Info

Tamper Proof Cat5e Outlets - Available with 2 or 4 Outlets

The Connectix 4000 Series offers Enhanced Category 5 performance in a High Density package. The Tamperproof outlet restricts the user’s access to patch leads, eliminating unauthorised or accidental patch lead disconnection which is one of the most common causes of network problems. The 4000 Series is extremely quick and easy to install; just attach the base plate, snap in the PCB, punch down the cables and install the cover. But the Tamperproof version has the added benefit that leads cannot be unplugged without first removing the cover, and... More Info

Extra long Booted Cat5e Patch Leads - Available from 30mt to 90mt

Connectix Cabling System Long RJ45 Patch leads are available in lengths from 30mt to 90mt. These RJ45 leads are made to order using high quality Cat5e connectors and grey solid Cat5e UTP Cable. Each patch cable is individually tested and bagged to ensure quality and performance. Features: Fully conforms to ANSI/TIA-568-C Each lead is individually bagged & QA tested  Plugs conform to ISO8877 More Info

Steel Wire Armoured Cat5e Solid Core Cable Suitable for Direct Burial

Armoured external Enhanced Category 5 UTP Cable, designed for external and direct burial. Cable is cut to length, we have a minimum order quantity of 50mt. When used with Connectix Enhanced Category 5 panels and modules it gives the exceptional performance required for transmission over all four pairs. Armoured Cat5e Cable Details: Features: Suitable for Gigabit Ethernet applications HDPE outer sheath Galvanised steel wired armour Pure copper cores Excellent performance exceeding ANSI/TIA Enhanced Category 5 specifications PLEASE NOTE THAT... More Info

Right Angled High density 24 Shielded FTP ports in 1u of space

The Connectix 2020 Series FTP Patch Panel is an alternative to the Standard Enhanced Category 5 FTP Panel. It offers the same Enhanced Category 5 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear of the panel, making termination and cable management easier. All sockets in the panel are commonly linked through the panel and can be grounded to the rack using the earth wire provided. Enhanced Category 5 panels provide exceptional performance for high speed LANs... More Info

4 or 5 ring horizontal cable tidy panel to help maintain neat cabling in 19"...

The Connectix Cabling System Cable Tidy Panel enables the neat routing of cables within a 19" rack. This panel comes complete with 4 horizontal rings. Details: These Cable Management Panels are designed to give extra support for patch leads and prevents obscurring other equipment. These Panels are designed to prevent cable strain. Makes installation neater and more professional 4 or 5 Rings Horizontal  More Info

Inline Cat5e IDC Coupler for joining two Cat5e Cables

IDC Cat5e Inline Couplers provide  an effective means of eliminating connection problems that may be  encountered during voice and data installation (for example cable  cut too short). It is also used when it becomes necessary to extend  a cable run to a new location. Four pair UTP Cat5e cable can be  joined together without compromising the Cat5e integrity of the system.  More Info

Fits Euro Size faceplate. 25mm x 50mm

Designed to take the place of a euro style module, the half blank simply clips into any euro sized faceplate. More Info

Flat singlegang faceplate for housing up to 2 Euromod modules

The Connectix Cabling System Single gang faceplates are industry standard size and are compatible with all euro style modules. They are supplied with fixing screws and compatible with Connectix Cabling system euro style modules and 1/4 blanks More Info

19" Cable Dump Panels, available in 1u and 2u sizes

Plastic Cable Dump Panels provide Ideal cable management keeping network cables tidy whilst allowing them to be fed through to the back of the network cabinet.Metal Cable Dump panels available upon request. More Info

Modular adapter that has a DB9 female connector that plugs into DB9 RS232...

This RJ45 adapter is used to run RS232/Serial data over longer distances using Cat5e cable to bridge the gap. Used in pairs and have selectable pin assignment to enable them to be used for a variety of purposes. Features: Gold plated pin 28AWG wire Thumb screw More Info

A simple toolkit for all your stuctured cabling installation needs

The Connectix Cabling Systems Installation Toolkit contains all the tools needed for installing data cabling in one convenient package. The kit contains a pozi-drive screwdriver for cage nuts and cabinet shelves, and a flat blade screwdriver for faceplate screws. It also includes a set of wire cutters, a punchdown tool, cable stripping tool and the Connectix Tester - an easy to use diagnostic tool to confirm connectivity of installed cabling. Features: Contains all the tools required for structured cabling termination Housed in a convenient... More Info

Flat doublegang faceplate for housing up to 4 Euromod modules

The Connectix Cabling System double gang faceplates are industry standard size and are compatible with all euro style modules. They are supplied with fixing screws and compatible with Connectix Cabling system euro style modules and 1/4 blanks More Info

Cat5e Patch Core Cable available 7 colours and supplied in a 305mt Box

CCS Cat5e UTP Patch Cable is designed highly flexible and designed for terminating on RJ45 connectors for making RJ45 Patch Leads. When used with CCS Cat5e Plugs it gives the exceptional performance required for transmission over all four pairs. The cable is supplied in easy to use 305mt boxes and is available in Grey, Red, Blue, Green, White, Yellow, Orange, Purple, Black & Pink. Features: Highly flexlibe cable Suitable for Gigabit Ethernet applications PVC outer sheath Supplied metre marked in boxes for easy installation Pure copper... More Info

Blanking panels for 19" cabinets, available in 1u and 2u

These 19" cabinet blanking panels are ideal for keeping your cabinet neat, tidy and working efficiently by blanking off any unused space. When used in an environment with servers, they will help stop front to back air movement within the cabinet, protecting your servers from warm air from the rear of the cabinet. More Info

Optional cable management bar for 24 Port Elite Panels

Optional Cable management bar for use with Elite Patch Panels (009-001-009-09 and 009-001-009-07) Picture shows Elite Panel with management bar fitted More Info

Bevelled singlegang faceplate for housing up to 2 Euromod modules

The Connectix Cabling System Single gang faceplates are industry standard size and are compatible with all euro style modules. They are supplied with fixing screws and compatible with Connectix Cabling system euro style modules and 1/4 blanks More Info