Controls up to 2 source devices and comes with a set of 2 infrared blasters
Designed to control 2, non-Sky related, IR controlled sources. Fully compatible with the Sky digital tvLINK® system. Used as new, or as an upgrade to an existing tvLINK® in-home distribution system. The tvLINK®plus is the latest designed product to join the tvLINK® range and has been designed to be used in conjunction with our tvLINK® unit.With this product you can now view and remotely control any two normally controlled infra red devices such as a terrestrial freeview unit, video recorder, digital satellite receiver or DVD unit.It should... More Info
Allows connection of Sky+ and Sky HD to an existing LoftBox® system.
Fully compatible with the tvLINK® system. Allows connection of Sky+ and Sky HD to an existing LoftBox® system. No further cable runs required. The LoftBox® Expander has been designed to allow two LNB outputs to be connected to an existing LoftBox® distribution system. It is ideally suited for when a SKY+ receiver is being installed. The Sky+ requires two feeds from the LNB (dish), so where there are no spare cables available to take the extra feed, the LoftBox® Expander combines the two feeds onto one cable. The unit operates by adding... More Info
Allows a satellite signal to be added to an existing UHF system
Allows a satellite signal to be added to an existing UHF system. High isolation between satellite and TV ports. Low insertion loss The Diplexers are designed to either combine or separate a terrestrial signal with a satellite signal to allow both signals to use the same cable. One possible application is using diplexers at each end of an existing satellite cable. This is to carry the UHF signal to an upstairs room to allow a tvLINK® to be installed (see system diagram). More Info
Designed to remotely control your Sky set-top box from another Location via coax,...
Simple to install Easy to Use Invisible Operation Sky Approved The tvLINK® system is the easy way to distribute high quality Sky digital pictures, plus normal off air channels, around the house with control of the digital satellite receiver from any chosen location. tvLINK® uses the tvLINK® function, built within the Sky digital receiver, to control the digital receiver from a different room (see system diagram). The tvLINK® eye sits on top of the extended TV. It sends the Sky remote control signals, from this room, to the Sky digital... More Info
Provides unity gain when installing a second Global signal booster/amplifier
Fully compatible with the tvLINK® system Provides unity gain when installing a second Global signal booster/amplifier F connector fittings for easy installation The AmpADDER is designed to increase the number of outlets available when using Global distribution Amplifiers, as part of an In-Home distribution system. The AmpADDER is installed between one of the outputs of an existing Global Amplifier or LoftBox, and the input of a second Global Amplifier. It incorporates a fixed value attenuator to ensure that the second amplifier is not... More Info
8 Port F-Type RF Distribution Amplifier is designed to supply up to 8 additional TV...
The F180 amplifier/splitter has been designed to supply up to 8 additional tv points in your home.It comes with a power supply along with a comprehensive instruction guide. More Info
16 Port F-Type RF Distribution Amplifier
The F280 amplifier/splitter has been designed to supply up to 16 additional tv points in your home. It comes with a power supply along with a comprehensive instruction guide. More Info
TV Link PSU for RF Amplifiers
The power pack 12V,500mA is required in those situations where a tvLINK amplifier is being used without a Sky digibox. It is also required when a Amp Adder is being used. Please note that the 8 way amplifier/splitter is supplied with its own power supply. More Info